Manual / How To
How To
Task-based guides for getting OpenFollow working with the rest of your rig.
Guides
Positioning the Camera
Interactive grid and camera + field-of-view sketches to plan placement before you are on site.
Integrate with data consumers
Pick a protocol and wire OpenFollow's tracking into lighting consoles, audio engines, and media servers. Includes a per-system directory.
Move lights with grandMA2
Receive PSN on grandMA2; patch a Stage Marker and activate XYZ so moving lights follow.
Move lights with grandMA3
Drive grandMA3 over PSN; enable XYZ Mode so moving lights follow.
Move a grandMA3 fader
Send the marker fader to an executor over OSC, for example to give the operator zoom.
Move lights with ETC Eos
Feed Augment3D over OSC through a Scenic Element Movable, then point movers at it.
Move lights with ChamSys MagicQ
Receive PSN as MagicQ Trackers; swap Y/Z and use a Tracker Palette so moving lights follow.
Send messages to the Operator Screen
Push standby and next-cue text from QLab, grandMA3, or ETC Eos over OSC.
Control OpenFollow with Companion
Preset positions, park and cue cards from a Stream Deck; zone and position feedback on its keys.
Run Companion on the OpenFollow Pi
Install Bitfocus Companion on the station so a Stream Deck plugs straight into it.