OpenFollow Preview

Manual / How To

Move lights with grandMA2

grandMA2 receives PSN natively. Refer to the official MA Lighting documentation for the up-to-date steps on your console version: grandMA2 Help – PosiStageNet (PSN) and Use Stage Markers. The makers of PSN also publish a step-by-step walkthrough: Step-by-step MA configuration for PSN (VYV / PosiStageNet).

grandMA2 only starts receiving PSN once at least one Stage Marker fixture is patched. With none patched, every value in the PSN window stays 0. Patch a single Stage Marker first – that alone is enough to display every PSN ID.

Setup

  1. In OpenFollow, leave PSN at its defaults (multicast 236.10.10.10, UDP port 56565, system name OpenFollow).
  2. Patch a Stage Marker. In Setup → Patch and Fixture Control, add a fixture from the library, search stage marker, and patch Stage Marker II (position plus rotation and scaling) or Stage Marker (position only). One is enough.
  3. Save the patch, then open Setup → Network → PSN Network Configuration. Add a server row and set Enabled to Yes; MA2 fills in the IP and name (a green name field means it connected). Confirm Multicast and Port match OpenFollow.
  4. Switch on the large Enabled button at the top right to turn PSN reception on system-wide.
  5. Click View Tracker. Active trackers show green; previously seen ones show black. Attach a tracker to your Stage Marker by entering its Fixture ID.
  6. Give each tracked moving light its real position and rotation in the Stage View, fastest with auto-calibration.
  7. For moving lights, activate XYZ on the fixtures that point at the Stage Marker – see XYZ.
  8. Move the marker in OpenFollow. The Stage Marker on MA2 follows, and any XYZ fixtures aimed at it track with it.

Fixture position in the Stage View

grandMA2 aims each moving light from its position and rotation in the Stage View. A moving light that is not at its real rig position misses the performer.

Enter each tracked moving light’s position and rotation by hand (grandMA2 Help – Position fixtures in the 3D stage), or let the console calculate both with auto-calibration.

The stage origin must be the OpenFollow Reference Point, or every marker lands offset – see Positions offset between systems.

Auto-calibration

Auto-calibration calculates each moving light’s position and rotation from where it has to point to hit four known spots on stage. Mark a rectangle on the floor and enter its corners A to D in the console; the OpenFollow grid works, as it is already taped and measured from the Reference Point. Store one Pan/Tilt position per corner for the moving lights, and the console solves position and rotation for all of them at once. Calibrate with XYZ off and switch it on afterwards. After a rig move, re-aim the corners and calibrate again; the XYZ values in the show follow.

Open it from a Stage View: tap the yellow ball in its top left corner (Stage View Options), open the Calibration tab, and tap Calibrate Fixture Pos. To add a Stage View, use the Create Basic Window pop-up. See grandMA2 Help – Stage View.

Step by step: grandMA2 Help – Auto-calibrate fixture positions.

XYZ is required for moving lights

A moving light follows the Stage Marker only once XYZ is active on that fixture and the fixture has a known 3D position in the project. Without it the Stage Marker moves, but the movers don’t aim.

XYZ lets MA2 aim a moving light from stage-space X / Y / Z – the Stage Marker’s position – instead of pan / tilt values. Each fixture that should follow needs XYZ activated and its rig position set, so the console can compute pan / tilt.

The exact procedure is in the official MA documentation: grandMA2 Help – Use Stage Markers. The high-level flow:

  1. Position the moving lights in 3D in your MA2 project – see Fixture position.
  2. Patch and position the Stage Marker, attached to the PSN tracker (above).
  3. Activate XYZ on the moving-light fixtures.
  4. Point the fixtures at the Stage Marker from the Position preset type, with X, Y and Z at 0 in Stage A.

Notes

  • The marker ID you assign in OpenFollow is the PSN tracker number MA2 sees; enter it as the tracker’s Fixture ID to drive a Stage Marker.
  • One Stage Marker fixture is enough to display every PSN ID; patch more only when you want several markers driven independently.
  • PSN data from OpenFollow is 60 fps; MA2 keeps up.
  • Stage Marker II adds rotation and scaling over the position-only Stage Marker. OpenFollow tracks position, so either works for following.
  • After calibrating, don’t invert Pan or Tilt and don’t move the fixtures in the Stage View. Either breaks the calibration.

Troubleshooting

  • Every value is 0 in the PSN window. No Stage Marker is patched. Patch one, save, and reopen the window.
  • Trackers listed but movers don’t aim. XYZ isn’t active on the fixtures, or their rig positions aren’t set.
  • Movers aim, but miss the performer. The moving light’s position or rotation in the Stage View doesn’t match the rig, or the stage origin isn’t the OpenFollow Reference Point. Run auto-calibration, then check the origin – see Positions offset between systems.
  • Movers follow, but at a constant distance from the Stage Marker. Fixture XYZ values are relative to the Stage Marker and add up as an offset. Set X, Y and Z to 0 in Stage A – see grandMA2 Help – Use Stage Markers.
  • No trackers in View Tracker. The global Enabled button is off, the server row isn’t enabled, or the multicast / port don’t match OpenFollow.
  • No PSN at all. Almost always multicast not crossing the switch. See Troubleshooting and the Networking & Security notes on IGMP snooping.