Manual / How To
Move lights with ChamSys MagicQ
MagicQ receives PSN natively. Each OpenFollow marker arrives as a MagicQ Tracker, and moving lights follow it through a Tracker Palette. Refer to the official ChamSys documentation for the up-to-date steps on your MagicQ version: MagicQ Manual – Trackers.
MagicQ consoles receive PSN out of the box. MagicQ PC and Mac receive PSN only while a supported ChamSys wing or interface is connected to unlock it.
Setup
- In OpenFollow, leave PSN at its defaults (multicast
236.10.10.10, UDP port56565). - On MagicQ, open Setup → View Settings → Network. Set IP Address and Subnet Mask for the interface on the OpenFollow network. On PC/Mac they must match the network adapter.
- Set Tracker Rx to PSN/SpotMe.
- Set PSN Function to Normal PSN 1 – see Tracker IDs.
- Open the Macro window → View Autom → View Trackers. Each marker OpenFollow controls appears with its live position, and MagicVis draws it as a green cross.
- Turn on Y/Z Swap for each tracker – see Match the axes.
- Record a Tracker Palette and use it on the moving lights – see Make moving lights follow.
Tracker IDs
OpenFollow sends each marker with its marker ID as the PSN tracker ID, starting at 1. MagicQ’s default, Normal PSN 0, maps PSN ID 0 to Tracker 1, which puts marker 1 on Tracker 2. Normal PSN 1 maps PSN ID 1 to Tracker 1, so marker N is Tracker N.
Match the axes
OpenFollow sends height on PSN Z; MagicQ reads PSN Y as height. Without Y/Z Swap, a performer walking upstage lifts the tracker into the air.
OpenFollow sends X stage left, Y upstage, Z up, in metres (see Coordinate system). MagicQ uses X and Z for the stage plane and Y for height. View Trackers applies Y/Z Swap, then scale, then offset, and shows the result in its X, Y, Z columns.
- Turn on Y/Z Swap for the tracker.
- Move the marker onto the Reference Point. X and Z read
0; Y reads the marker’s height. - Move the marker stage left, then upstage, then raise it. The cross in MagicVis moves the same way.
- If an axis runs backwards, correct it with a negative scale.
If the cross sits a constant distance from the performer, MagicVis and OpenFollow use different origins. Put the MagicVis origin on the OpenFollow Reference Point, or correct the difference with the tracker’s offset. See Positions offset between systems.
Make moving lights follow
MagicQ aims each head from its position in MagicVis. Place the heads at their real rig positions, or the beams miss the performer.
- Select the moving lights, set pan and tilt to centre (
128, 0°), and record a Position Palette. Any other pan or tilt value acts as an offset from the tracker. - Open View Palette, press SET TRACKER, select Tracker, and enter the tracker ID.
- Use the palette in a cue. The heads crossfade onto the tracker on the cue’s fade time and follow it while the cue is active.
- Move the marker in OpenFollow. The heads follow.
The heads aim at the marker’s height. Set it with the marker’s Z in OpenFollow (see Z (height)). Per-head X and Z offsets from the tracker are set in View Palette, where they show in the Pan and Tilt fields.
Notes
- With Normal PSN 1, the OpenFollow marker ID is the MagicQ Tracker number.
- MagicQ also matches marker names: a marker named the same as a MagicVis Attach Object moves that object. Keep the names different unless that is the intent.
- Tracker settings belong to the console, not the show. To load them from a show file, use LOAD SHOW + CONS with PORTS selected.
- To accept a tracker from one OpenFollow station only, enter that station’s IP address for the tracker in View Trackers.
- FX run on top of a Tracker Palette, around the tracker position – a circle around the performer, for example.
- To program without OpenFollow on the network, set Tracker Rx to Simulator. It moves Trackers 1 and 2 and needs no ChamSys hardware. MagicQ’s demo folder includes a Tracker Demo show with Tracker Palettes already programmed.
- PSN data from OpenFollow is 60 fps.
Troubleshooting
- No trackers in View Trackers. Tracker Rx isn’t PSN/SpotMe, the MagicQ IP Address isn’t on the OpenFollow network, or MagicQ PC/Mac has no unlocking ChamSys hardware connected.
- Marker 1 shows up as Tracker 2. PSN Function is Normal PSN 0. Set Normal PSN 1.
- Tracker rises when the performer walks upstage. Y/Z Swap is off for that tracker.
- Cross moves, heads don’t. The palette isn’t set as a Tracker Palette, its tracker ID is wrong, or no cue using it is active.
- Heads follow but miss by a constant amount. The heads aren’t at their rig positions in MagicVis, the palette was recorded with pan or tilt off centre, or the origins differ (see Match the axes).
- Cross turns red, then disappears. PSN stopped arriving. MagicQ turns the cross red on loss and removes it after 2 s.
- No PSN at all. Almost always multicast not crossing the switch. See Troubleshooting and the Networking & Security notes on IGMP snooping.
Further reading
- ChamSys – Trackers (PSN receive, View Trackers, Tracker Palettes, Simulator).
- ChamSys – Settings: Tracker Rx and PSN Function.